Other Accessories for Clay Paky Display Line Projectors VIP/SIP 150 - 300

(Not for VIP 1200)

Rain shield
It protects the projector against bad weather in outdoor installations but it is not suitable for severe weather conditions. It is made of aluminium and plexiglass (IP23). It can be lifted up, without being removed, making it possible to easily access the effects perform maintenance. It is not suitable for housing projectors that use accessory C52159 (slide changer). Dimensions: 34.25 x 8.7 x 7.3 in (870x220x185 mm)
Code C52182 - Price $189.00

Wall Bracket
Bracket with 4 holes for fixing to the wall. Fitted in the two different positions, it permits mounting the shelf towards the top or bottom. The projector can be turned completely around its point of anchorage to obtain the best working position.
Code C52170 - Price $79.00

Ceiling Plate or Stand
Plate for fitting the projector on a horizontal surface. It can be mounted to the ceiling or used as stand. The bottom side is covered with non-slip rubber.
Code C52171 - Price $29.90

Assembly plate
A fixing plate that can be combined with the ceiling plate. It permits sandwich installation on any mounting that permits using at least 2 of the 4 holes available on the two plates. Also used for the telescopic ceiling mount.
Code C52174 - Price $14.90

Telescopic ceiling mount
A telescopic mount that can be combined with the 4-hole fixing plate. After fitting the fixed portion of the mounting inside the false ceiling, take out the extending portion and lock it in the required position. It is available in two versions: for false ceilings with a depth of 40 - 70 cm and 70 - 105 cm.
Code C52172: 17.75 in - 27.5 in (40 - 70 cm) - Price $69.00
Code C52173: 27.5 in - 41.3 in (70 - 105 cm) - Price $69.00

Electrified rails
Optional rails are available in 130 mm and 210 mm lengths, instead of the standard rails 170 mm long. By using the two kits it is possible to get around the problems of mounting accessories and especially mirrors that are found in some combinations.
Code C52179: 130 mm - Price $19.90
Code C52180: 210 mm - Price $19.90

Truss hooks
Make fixing possible on tubular trusses of diameter between 15 - 35 mm and 30 - 50 mm.
Code C52175: 1.18 in - 2 in (40 - 50 mm) - Price $7.90
Code C52176: 0.6 - 1.4 in (15 - 35 mm) - Price $7.90

Gobo Adapter Ring for 31,5 mm to 51.8mm
For converting 31.5mm metal or glass gobos to 51.8mm so they can be used in  effect accessories that fit 51.8 mm gobos or slides of 50 mm x 50 mm.
Code C21035 - Price $16.90

Gobo Adapter Ring for 51,8 - 53,3 mm to 66mm (M-size)
For converting 51.8 or 53.3 metal or glass gobos to 66mm (M-size) so they can be used in the gobo rotator.
Code C21036 - Price $16.90

Fiber Mount and Adapter
This permits housing the projector and positioning the terminal of the bundle of standard dimensions 30 mm.
Between the light source and bundle terminal it is possible to add up to 2 accessories, typically a colour-changer or a graphic effect produced by a rotating gobo, shutter, graphic disc, etc. The bundles of fibre optics are available on the market in various materials and dimensions.
Code C52117 - Price $199.00